2 Ways to Closing the Shaker Charm
Chakorn
Last updated: 19 Jun 2025
171 Views
The classic technique for closing the shaker charm is to use a clear film ( cut from an A4 clear film ) + UV resin as glue to seal the film with the resin workpiece. And coat all surfaces again with UV Resin or Epoxy resin.
When I start to sell the shaker charm mold. I found a problem with cutting the film. Some of my designs are hard to cut. So I started to make the mold for a clear cover sheet. And this clear epoxy resin sheet can fit into the mouth of the shaker body. And I call it CSM ( cover sheet mold ) anyway, the corner of the workpiece will be different from the classic technique.
If you want to search CSM just add CSM in front of the name of the shaker mold. Ex S012 Shaker mold, the CSM is CSM S012.
This is a sample of a classic closing.
https://www.instagram.com/p/B9t_euWgyF2/
And these are tutorials on using CSM.
https://youtu.be/-qItePONRSY?si=2-E89pfYLXQlTNDu
https://youtu.be/IFNe2HDb17U?si=FKHDTIf_OCwUTa-x
When I start to sell the shaker charm mold. I found a problem with cutting the film. Some of my designs are hard to cut. So I started to make the mold for a clear cover sheet. And this clear epoxy resin sheet can fit into the mouth of the shaker body. And I call it CSM ( cover sheet mold ) anyway, the corner of the workpiece will be different from the classic technique.
If you want to search CSM just add CSM in front of the name of the shaker mold. Ex S012 Shaker mold, the CSM is CSM S012.
This is a sample of a classic closing.
https://www.instagram.com/p/B9t_euWgyF2/
And these are tutorials on using CSM.
https://youtu.be/-qItePONRSY?si=2-E89pfYLXQlTNDu
https://youtu.be/IFNe2HDb17U?si=FKHDTIf_OCwUTa-x
Related Content
